These mallets are a hybrid between the Original and Evolution mallets using lightweight carbon/EVA handles and attractive Kikar hardwood heads with tufnol end plates.
We only use imported hardwoods which are certified as being sourced from sustainably managed forests. The timber is air dried in block form for over a year. The inlaid sighting line is made from sycamore. Tufnol is a 12 mm thick brown resin-impregnated cloth material, which is bonded with a slightly flexible adhesive onto the ends. The end plates are virtually unbreakable and provide a crisp and true surface for striking the ball.
Our standard heads measure 60 mm (2 3/8″) wide x 65 mm (2 1/2″) high. They’re available 9 1/4″, 10″ and 11″ long.
When an appropriate mallet handle has been fitted, lead weights are inserted into pre-drilled holes on the under side of the head and then plugged with hardwood dowels to achieve the desired overall weight. Our standard weight mallet is 3.00 lbs overall. Mallet weights from 2 lbs 9 oz to 3 lbs 4 oz may be custom made at no extra charge. The standard weight mallet is 3.00 lbs overall.
Our distinctive gold crest is stamped on one side of the mallet head and the overall mallet weight stamped on the handle. Each mallet then receives no less than four spray coats of epoxy urethane with sanding in between coats to create a high luster, hard wearing finish.
To personalize the mallet, initials may be stamped on the blank side of the mallet head in gold foil at no extra charge. Please note that we can only print in capitals at 36 pts as shown above. 10 letters is the maximum.
If you prefer to have a name or letters printed in gold on a 12 or 18 mm black label as pictured, please just mention it when ordering. The advantage of a label is that it’s removable if circumstances change.
The most popular option is to have the top section of the handle shaped to an octagonal pattern 31 mm x 27 mm with an 8″ lower roll grip hand turned to an attractive and comfortable shape. For golf croquet players the roll grip is less likely to be required so the octagonal section is extended. Handles and heads can of course to be custom made to order. The preferred style of handle can be specified when ordering.
The virtually indestructible 17 mm diameter carbon and fiber glass shaft is foam filled to minimize vibrations.
EVA is a closed cell foam grip material being waterproof, comfortable and light. Available in grey or beige. The EVA is specifically made in a 35 mm tubular form of relatively firm hardness. The grip sections are individually shaped to a traditional octagonal shape measuring 31 mm x 27 mm but this can be customized to suit the player. All mallets are supplied with a medium stiff flex although a slightly more flexible shaft is available upon request for players wanting a whippier, lively handle. The whole handle weighs an average of just just over 9 ounces. Unless specifically requested, the EVA comes to within 50 mm of the head, however, we can adjust this length as required. We can also supply the handles with different diameters or 35 mm round shape if preferred in any lengths up to 42″.
Adjustable two piece handle: A revolutionary two piece handle with a telescoping shaft allowing the user to adjust the height by up to 4″, twist the handle orientation 360 degrees, or take the top octagonal section of the handle off for travelling. The lower 17 mm shaft measures 19.5″
The length adjustment can be made up to 2″ up, or two inches down simply by using the alan key provided. When ordering, stipulate the middle length required.
Aluminium fittings are available so that the heads can be removed for travel or changed over.